Serving all of Maine
Free quote. No obligation.
Pigmented epoxy for basements, showrooms, lobbies and garages
Moisture-tolerant coatings for slabs
Polyaspartic floors, most done in a day
Showrooms, kitchens, warehouses, retail
Thick base coats for bays, barns, hangars
Textured, slip-resistant, 100+ flake blends
Ground and polished, no topical coating
Color matching, logos, borders, samples
Three systems, each built on a diamond-ground slab.
Colored acrylic chips broadcast into a wet moisture vapor barrier basecoat (MVB), then sealed under a clear polyaspartic topcoat.
A pigmented epoxy primer, hand-worked metallic epoxy and a high-build clear coat. The pattern is worked by hand, so no two floors match.
Mechanical polishing with densifier and guard. The slab is ground with diamond grits from 100 up to 3000, densified with lithium silicate and finished with a guard.
Pick a room, choose flake or metallic, and try more than 100 flake blends on the floor. Like one? Send it with your estimate request.
Open the full visualizer Walk around a 3D garage
Professional epoxy systems are 4 to 5 times thicker and about 20 times more abrasion resistant than kits, and they are UV stable.
Compared with water-based hardware-store epoxy kits. Typical professional epoxy systems; figures vary by product.
Bare concrete takes a beating from Maine winters. Sand, road salt, liquid de-icers and freeze-thaw cycles pit and flake the surface.
Drag the handle to compare bare, stained or ground concrete with a preview of the finished floor from our floor visualizer.
Selected Google reviews from garage, wine cellar, showroom, hangar and pool deck jobs. Read the reviews on Google
I cannot recommend New England Epoxy enough! They just completed our garage floor, and the finished product came out absolutely excellent. I had a lot of questions throughout the process, but Jebb, the owner, was fantastic to work with.
The same four steps on garages, basements, shops and commercial floors.
Send photos or call for a detailed quote, with an on-site visit when the job calls for one.
Diamond grinding for adhesion, then cracks and joints are filled.
For flake floors, a thick moisture vapor barrier basecoat (MVB) and flake broadcast. For metallic floors, pigmented epoxy primer and hand-worked metallic epoxy.
UV-stable clear polyaspartic topcoat, anti-slip where wet.
New England Epoxy was founded by Jebb and Cody and has 10+ years of floor coating experience. Jebb answers questions as the owner. Cody walks customers through the process.
Every project starts with a free consultation and a detailed quote. Jobs range from a single-car garage to a 50,000 square foot warehouse.
From Kittery to Fort Kent, Portland to Bangor.
Homes and businesses in every part of the state are covered. The crew is based at 858 Main Rd in Holden and travels to the job. Call (207) 931-6769 to confirm availability in your town.
New England Epoxy serves all of Maine, from Kittery to Fort Kent and Portland to Bangor. The crew is based in Holden and travels statewide for residential and commercial floors. Call (207) 931-6769 to confirm availability in your town.
Every estimate is free and itemized; the price depends on square footage, concrete condition and the system you choose.
Most residential garages of 1,000 square feet or under are finished in one day. The floor is walkable within a few hours and ready for vehicles in as little as 24 hours.
No. Professional epoxy systems are 4 to 5 times thicker and about 20 times more abrasion resistant than kits, and they are UV stable. Water-based kits tend to yellow, peel and wear through in 2 to 3 years.
Yes. Projects run from 500 to 50,000 or more square feet, including warehouses, retail, restaurants, breweries, dealerships and shops. Installs can be scheduled in the evening, on weekends or in phases to work around business hours.
Call (207) 931-6769 or send project details through the estimate form below. Send a few photos of your floor or give us a call and we'll quote it, with an on-site visit when the job calls for one. You receive a no-obligation quote before any work begins.
Free estimate
Send a few photos of your floor or give us a call and we'll quote it, with an on-site visit when the job calls for one. You receive a detailed, no-obligation quote before any work begins.
New England Epoxy, 858 Main Rd, Holden, ME 04429
Monday–Friday 8:00 AM–5:00 PM · Weekend work by request
info@newenglandepoxyllc.com
